Same great bassoon reed, better price! You don't get to specify the color thread you'd like to have, but the reed quality is still the same. You'll still receive a wrapped reed, but the thread will be a MYSTERY (likely seasonal).

Basic Swift Reed

$30.00

Quantity

Cane brand: Medir

Shape: Hybrid Herzberg/Rieger 1A mixture

Forming: Miller Marketing Pro Forming mandrel pins, parabolic taper with flat tips

Finishing: Rieger Tip Profiler, Template #1

Wire Measurements:

1st - 27.5mm (measured from butt of reed to top of wire)

2nd - 8mm (measured from center of 1st to center of 2nd wire)

3rd - 5mm (measured from butt of reed to center of wire)
If your reed was somehow damaged during shipping, I will happily replace the reed. Please let me know within 24 hours of receiving your order by submitting through the "Contact Me" page with subject line "Damaged Reed".

If you have any *preferential* issues with the reed that you've received, please reach out through the "contact me" page, or consult the "REED ADJUSTING TIPS" dropdown for tips to adjust the feel of your reed.

Reed Anatomy Resource

In my experience, even if you are not trained in adjusting reeds, you can still fine tune the feel of it with simple tools! All that is needed will be a pair of pliers and a fine-grit sandpaper (1500 grit is what I use). I recommend the following procedures:

Common

Issues

Explanation

Recommended Adjustment

Too Open

Tip opening is

too open/tall

Use pliers to squeez the first wire

top-to-bottom. This will close the

opening and make the reed more

responsive and easier to play on.

I encourage playing on a reed

thoroughly before doing this, as

the embouchure naturally closes

down this opening.

Too Closed

Tip opening is

too closed

Use pliers to squeez the sides of

the first wire. This will make the

tip opening wider and give it more

volume and power, and also feel

harder/more fatiguing to the

embouchure.

Too Hard

Reed can feel

overly

fatiguing to

play on, but

not too open

Use fine grit sandpaper and sand

the channels of the reed. This

softens the structure of the reed

which allows it to vibrate.

Too Resistant

Reed can feel

resistant, that

it won't take

all of the air

being used.

Like blowing

through a

screen

If you feel it is hard to make the

reed sound, try using the same

fine grit sandpaper above the

thumbnail to thin out the playing

tip of the reed.

Basic Swift Reed

REED SPECIFICATIONS

QUALITY ASSURANCE

RETURN/REFUND POLICY

REED ADJUSTING TIPS